GM Discussion Forum

hi everyone i have Chevrolet Impala 2014 with VIN=2G1175S38E9108800 its BCM damaged now i arranged Other used BCM from 2017 Impala VIN= 2G1155S30H9166149 with same Circuit Board this car has no option for prepare control module for removal and when i try change the PIN even after change the PIN i am unable to program it online using vehicle orignal VIN which is 2G1175S38E9108800 can someone please help me to sort this issue thank you..

@Lyubomir Krastanov @Troy GCI_Log.Txt ProgramLog.Txt

I bought UDD ICM instead of UDC Dual zone HVAC - but rewrite VIN is a second step, it works correctly I'm just learning to use SPS2.. >Had problem with payment >Then i saw calibration history with UDD //// And next day : "User account is disabled" I'm upset My Vin KL79MPSL9NB060590 Can anyone, who have unlimited access, send me calibration files for UDD Great thanks

Hi! I was wondering if it is possible to do this on older Global A? On my car (SAAB 9-5), the factory option was one or the other but not the ability to have both. Which kind of sucks... I'm willing to upgrade and retrofit hardware if needed

Hi, is there somewhere guide for repairing this faulty NG 2.5 modules? There are tons of topics on google about failed HMI modules. Rebooting, freezing ...wont power up...etc. But no solution! Even here I cant find any course?! My module will turn on, but will shut down after 10 secs, then starts again after 20 sec...or after hour. Any help? 🙂 thanks from EU 😉

Is it possible to change the vin on a used camera? SPS won't let me do it.

In short got screwed by the dealer, and they said it's impossible to add those features... their solution was to install a crappy aftermarket alarm that I absolutely hate, that tells me the components are there, but again they say using factory remotes won't work and can't be done, as far as I know the tire pressure monitoring module is the same as the remote receiver, but when I tried using SPS2 there is no option to add remotes / fobs Any help / suggestions greatly appreciated, Thanks

hi every one i hope you all doing well..!! i have question can some one please correct me? i have Sierra GMC 2015 this car HVAC module damaged now i want to install used 1 in this car and i also have PIN for this used module my question is how can i able to program it with techline connect using vehicle original VIN? first of all i need to change the module PIN? in DPS security code 1 should be the donor module pin? and security code 2 any pin what ever i want or vehicle original pin? so my main Goal is to program module online with vehicle original VIN .... thanks All members

i need wiring diagram for bdm motorola mpc am29bdd160G for tcm 6t45 gen2

Dear members, is it possible to change the VIN in EBCM (Brake Module) with DPS programming software on 2023 Chevrolet Suburban? Best regards

Has anyone tried modifications to the global B radio, A11, to enable or disable features of the HMI/CSM itself? Or is working on a map of which bits correspond to features on the 2024 Global B radio? For example, disabling SXM. I live outside Sirius XM coverage, despite my vehicle having that feature enabled. When comparing vehicles sold outside North America, the calibration files differ from just SXM availability. The 13.4' radio is only in North America so there are not more things different on the calibrations files then just the screen. Along with not knowing exactly what file corresponds to what, I could assume that the moduleID is similar to older radio calibratio…

I have a problem with easytronic transmission of an Opel Corsa E 2015, the old one module has been broke. I Tried to adapt the new one from same car 2017 by sps but without success, a guy from a forum tried to do it by GM VCI number, error too. Can you help me to change VIN number and adpat it to the car? This is photo of the new one. The VIN of the car is W0L0XEP08F6045945 Best regards!👍🏻

Hello, I'm having a bit of an issue working with a K33 HVAC module in bench setup. I can connect and read module IDs, but I cannot do anything else. Programming attempt just aborts instantly with error or asks to populate VIT2. There are no error codes, just nothing happens. I would like to hear some words of wisdom on how to proceed. I have attached ECU read log and "programming" log. K33_log.TxtProgramLog_error.Txt

Im looking for a way to unlock them myself and also im having a hard time getting the vehicle to program the tcm and well all modules to the vehicle.

Hello everyone Guys, please tell me what I'm doing wrong I installed the EBCM unit from another car on the 2018 eqinox, changed the VIN pin, and there is still a malfunction in the EBCM B3902 Thanks advance

Hi, I have heated and cooled seats but no heated steering wheel. From what I think I know, part needed are: Climate panel, Steering wheel and squib. Found the parts and I want to know if it's worth doing it. Can someone tell what need to be programmed in order to make it work? I will also need the wiring diagram for this. Thanks.

Hello, did anyone knows what resistance should to be between can L and can H on each modules at Global B? At example i got a Escalade 2024 and on the TCM (transmission module) i got a 100 Ohm, on the TCCM (Transfer Case module) 50 Ohm, ECM = 120 Ohm and its OK - like on the wiring diagram. I'll try to find lost comunication on the CAN1 and CAN2, when i make bypass on the TCM and TCCM i still dont have communication with others modules. Did anyone have a TCM and TCCM and can check the resistance?

why i cant program by xml file its apper to me fault messege when i was finshed and i need to excute the file

Welcome. I wanted to convert an uplevel to an uplevel combo. My car is a 2010 astra j MY and the ipc is from a 2013 astra j MY. Ipc programmed under my vin. After installing ipc, it shows error from airbag, afl and shows message low fuel level. The pointer shows the correct value. The donor car had AFL in its equipment. After reading the errors there is a communication problem with the multi-axis acceleration sensor. How can I solve this problem? My vin w0lpe6ec1ag087890 Vin of the car from which I have ipc W0LPF2EJ8DG117315

Hello, happy new year everybody. I recently purchased and sent Troy files for my Cadillac ATS power steering vin change and he sent me the Zipped files. I unzipped them and uploaded the calibration, I GET THIS ERROR ??? please help something about the seed files he sent me

I have a 2015 Silverado that I changed the infotainment system out with a 2018 Silverado to have apple car play but android auto does not work and the factory navigation says the maps are missing. I know there was a USB update that needed to be performed but GM has removed those files and are no longer available. Does anyone have a old copy they would share? The VIN to the donor truck is 1GC1KWEY7JF289019 I'm pretty sure the USB update has the maps on it. I'm also in North America. Thanks

I own a heavily modified 2019 Chevy Silverado 2500 Duramax show truck and this truck has had the ABS and 4x4 transfer case removed so it is showing service 4x4 and stabilitrak errors on the dash. I am just wanting to disable the lights so they do not pop up and ding at me every time i start the truck and program the Denali cluster upgrade i have for it. I had someone helping me out but i can no longer get in contact with them. Would be willing to pay someone for the services. VIN 1GC1KTEY7KF159659

Hello, have someone an idea who i can change the VIN from a Videomodul K157. When i load the Software (DPS) on it it comes a Error Message after abaout 9 minutes. Thanks

Hello guys, i have changed climate control panel for corvette c7 2014 The old climate part number 23169939 The new used climate part number 23218535 Which my car has not seat heating the new climate has seat heating When i connect the plug of new one to radio display the radio display goes black and when i remove the plug the radio display working well Is the issue with climate control panel that is not compatible with the car

Is sps2 available at the moment because when try add vin number gives issue 401 of link does it from server or from me