Welcome. I wanted to convert an uplevel to an uplevel combo. My car is a 2010 astra j MY and the ipc is from a 2013 astra j MY. Ipc programmed under my vin. After installing ipc, it shows error from airbag, afl and shows message low fuel level. The pointer shows the correct value. The donor car had AFL in its equipment. After reading the errors there is a communication problem with the multi-axis acceleration sensor. How can I solve this problem?

My vin w0lpe6ec1ag087890

Vin of the car from which I have ipc W0LPF2EJ8DG117315

Hello,

This is possible to achieve, of course, but totally depends on your skill level.

First of all, need to check for differences in wiring for IPC between your MY10 and newer MY13 clusters. Needs to be rewired a bit, if there are some differences..
Multi-axis sensor error code - possibly, just needs to be relearned. Can be done either with GDS2, SPS2 or with a Type4 app for DPS.

Also, post full scan log from GDS2 for your vehicle (or, at least, for this IPC) - it's important to know which calibrations are currently loaded and what precise DTC codes there are present.

dtc astra j full odczyt.pdfdtc astra j full odczyt - translated.pdf

I use gds2 in polish. I translated the file using google