GM Discussion Forum

Hello comunity, I have Finaly done it. I put an Insignia IO6 and and Insignia IPC in an Astra j from 2011 and except for some littel issuse everything works great.

Hello everyone, I have a 2023 Chevrolet Tahoe and I would like to add the Arabic language. Can anyone help me?

HI ALL I HAVE A MALIBU LTZ 2013 WITH IPC (UDB - DRIVER INFO ENHANCED (SEGMENTED) AND DONOR IPC 2016 LT MALIBU WITH IPC ( UDD - DRIVER INFO ENHANCED (MULTI COLOR STANDARD GRAPHIC) I ALREADY CHANGED THE VIN & PIN KM SHOWING PROPER BUT I WANT TO CONFIGURE IT WITH LTZ SPECIFICATION LIKE TPM SENSORS ETC THE PROBLEM IS WHEN I TRY TO CONFIGURE IPC USING ORIGNAL LTZ 2013 VIN ITS GIVING ME COMPATIBLITY ERROR ANY ONE HAVE IDEA HOW TO SOLVE THIS THANKS IN ADVANCE BELOW IS THE VINS' ORI CAR : KL1GM5D56DB020020 DONOR CAR : KL1GJ5DU3GB521161 THANKS

Hello, community, I've installed an I06 in my Astra J. Everything is working fine so far. I was wondering if it's possible to adjust the screen brightness when the headlights are on? Because when the headlights are on, the screen is relatively dark. I know there’s a setting for the instrument panel lighting in the car, but it’s set to 100%—it can only be dimmed.

Hello. I have a project I am working on with my 2014 Buick lacrosse. Last year I upgraded the HMI 2.0 to the 2.5. This year I wanted to upgrade the radio module so I can use android auto properly. I grabbed a radio module that would work be compatible and found a vin that would work. I installed the module and got the calibration files from sps from the vin, created an archive and attempted to program it. I got to 99% on DPS and it stopped with a message that said "Error occurred during programming" Now the radio screen is black and doesn't have theft lock on it. Ive looked over the archive files and everything seems to be in the right order and it looked like the right …

Hi Looking for someone that has access to SPS2 China programming, need few calibration files. Not for free

Hi guys, I'm working on activating Adaptive Cruise Control (KSG) on a 2023 Chevrolet Equinox Brazilian market. My car: VIN: 3GNAX9EJ0PL171440 Trim: 1LT (1XH26) FWD, 1.5T, 6-speed automatic RPO codes: AG1 AG5 AR9 AXP AYC CJ2 CNQ CV2 DD8 DWW FHR FWD GAZ GNA GND HMR IOU J23 J60 LYT MBA MNK NN7 N5F PJS RJA RR0 SJF SPM TB4 UDD UZ6 U2J V8B WMX ZP5 1LT All Brazilian Equinox come without ACC but with same hardware — DD8 front camera, LYT lane keep assist, UZ6 following distance indicator, J60 cruise control. I was able to activate ACC menus on the cluster — menus appear but show no ACC signal from BCM/FVCM. Donor car (US market with confirmed KSG): VIN: 3GNAXMEG4PL149819 Trim: 1…

Hello everyone, my name is Deryck and I’m from Brazil. I bought a 2020 Buick Enclave cluster to install in my 2022 Chevrolet Equinox. A person from the United Kingdom did the calibration/programming for me, and technically everything turned out perfect, with a few exceptions. The gear position does not appear on the cluster, and the oil temperature is not being read. Does anyone know why this could be happening? Could someone help me with this issue? Everything else is working perfectly. However, one important detail is that this person from the UK programmed it using Opel Insignia software, because the Equinox never came with this cluster from the factory and he did n…

hi is there any way of getting the 4 pin pass code with using a vxdiag to retrive it from this W0LPF6EC3A8078874. indtead of going to vauxhall thanks

Hello, can someon help me please. I search the Key and the Algo from IPC (Astra 2018) The Seed ist: d743 Can someone say me ALGO and the KEy from this? Thanks a lot

Good evening, need of an Opel Adam 2013 wiring diagram and pin assignment for the radio R3 IL3 and BCM body control unit. Thank you I am grateful for any help.

Hello my friends, I'm in a complicated retrofit scenario. I'm adding an IPC instrument panel from an Onix LT (VIN 9BGKT69V0HG10525) to an Onix Joy (VIN 9BGKL48U0KB21164). I managed to match the VINs normally using the dump file in HXD. However, during the initial file reading, the configuration DIDs got confused in the bin file, and some functions on the panel don't activate at all. The available menus are oil lifespan, language selection menu, and unit selector, besides average speed, range, average km/l, and stopwatch. But I saw in the DIDs that it's possible to add battery voltage and other functions to this IPC, and I saw that doing this with DPS would be much easier,…

Hello! I have a 2022 Chevrolet Trailblazer (K-VIN/Global A spec like what's sold in the U.S. and Canada, not the Thailand version) and would like to upgrade my instrument cluster from UDC (3.5" monochrome display) to UDD (4.2" color display). My understanding is that the UDD cluster will need to be tailored to my car's VIN and mileage (perhaps among other things, I did see discussion concerning the remotes and PIN codes...). I am technically oriented, but don't have any of the programs or equpiment needed to even attempt doing this myself. Would be very happy to work with someone to tackle the project if it could be done via remote and not shipping the physical cluste…

hi i have put astra k ipc into a astra j and cars working .but i am getting warning for front camera and tps warnings and the ipc plus imo Environment error . my car dose not tps and a front camera. how do i edit these out and what sofware do i need i got dps do i need xml editor. the clocks are astra k 39060519 thanks

So I’ve been trying to upgrade my HMI from 2.0 to 2.5 so that I can have CarPlay in my 15 sierra. I purchased the theftlock from here to use with dps and it worked but screen kept resetting and with a Buick app setup that I’m guessing was on the hmi already. I upgraded the firmware and now I just have the “calibrate device” on my screen. Does anybody have the dps calibration file to use for that? Or does it need to be done with a thumb drive? I know the sps route should work, but I’d have to wait on a friend for that route.

Hello all! I have a 2014 Cadillac ATS with NG2.0 (23427513). Car came to me in this exact same state, screen says Update failed, counts down from 300 for shutdown until an update media is plugged in. I made the update USB with SPS2 for the exact part number. When I plug in the USB to the car, Update starts but then fails at script.lua496 at %67. Is there any way to recover this HMI? thanks!

Hello. I wanted to program the instrument cluster from an Insignia B to an Insignia A. During programming, I’m getting a programming error. It’s as if the instrument cluster is resetting itself. Communication with it is working. I would like to match the software to an Insignia A with VIN W0LGM57M791000821. I’m counting on your help. ipc_udd.Txt

HI ALL I HAVE GMC SIERRA 2022 WITH VIN 3GTNU9EDXNG640469 ITS ELECTRONIC POWER STEERING CONTROL MODULE DAMAGED I PURCHASED PSCM FROM JUNK YARD WHICH IS SILVERADO 2024 WITH VIN 3GCND9ED8RG234244 AND I PROGRAMMED IT WITH TECHLINE VIN IS CHANGED NOW BUT WHEN I PERFORMING SERIAL DATA AUTHENTICATION CONFIGURATION ITS FAILED ALWAYS AND STEERING IS STILL HARD ANYONE FACE SAME PROBLEM BEFORE AND HAVE SOLUTION PLEASE SHARE THANK YOU

View full gm info

I have been trying to program my SDGM and keep getting an error message when programing side 2 it appears to be Can Bus 5 not communicating with the Radio. I look at the radio and the Vin number is missing the leading 1 in the vin number in the radio (so showing a 16 digit vin). Anyone know if this could be my problem? It is Global A and that is the only thing I can see that would keep it from completing the programing sequence. If this is my problem anyone know how to correct the VIN? I have downloaded the USB files from SPS and updated those and the program software but it will not correct the VIN

Has anyone got SavvyCan working to sniff GMLAN? Currently using an ESP32 but i do have a VCX Nano but that doesn't seem to want to sniff with SavvyCan

Hello everyone, I have upgraded 2018 Buick Regal (W04GV8SX9J1119356) with front and rear park assist UD5 (there been only rear UD7). Used control module and front sensors from Opel Mokka J13 (don't remeber exact VIN, something like W0LJD7EE9HB244878, RHD, it has UD5 but has no UFG), rear sensors remain stock. Also BCM been reprogrammed to enable flexride F45 and HMI to enable surround vision cameras UVH. Park assist works well, but the problem is I'm not getting rear cross traffic alert messages. No dtc recorded. However, it works when requesting with diagnostics, B218L - functions - visual and sound alert. It also works when replacing park assist …

HELLO BEAUTIFUL PEOPLE OF THIS FORUM .. I HAVE A QUESTION IF I GET A NEW VIRGIN MOTOR MODULE LIKE THE ONE IN THE PHOTO WITHOUT PROGRAMMING, WILL I BE ABLE TO READ IT WITH DPS TO OBTAIN THE VIRGIN FILE

es posible poner ecu de motor usada ya que estoy tratando de hacer pruebas con DPS Y no logro cambiar chasis vin. tengo calibraciones bajadas haciendo SPS ONIX 2023 ECU E64 LLAVE COMUN.zip

Hello everyone, has anyone tried activating the rain sensor indicator on the dashboard of an astra j or cruze? I soldered the necessary elements according to the scheme, and activated the P_RAINSENSE_INDICATOR_ENABLED parameter via dps and xmlfile. But the indicator is only flickering, I read it is a problem with the software. Is there anything else you need to turn on?