GM Discussion Forum

Hi друзья. Нужен доступ для обновления gds 2 кто может помочь

Здраствуйте ребята. Кто может помочь получить калибровки bcm для включения Cruise control XUFPC6DD5B3029413

So I've really been doing a lot of reading and am learning somethings but one thing I'm not understanding is the layout for the utility file header says the bytes 2 and 3 should be the module ID for the utility file. My though is thats how the utility file knows what module to send the commands to but in all the utility files I have its 00 00. Is this because in SPS you are selecting the module you want to program? If so in dps are you selecting the module in the get info section?

Hello all! Hope youre well... 05 Colorado need to update miles. These trucks will only take the BCM miles. If you lower miles on cluster, BCM will put it back to whatever it has stored. If miles are higher than BCM, miles on cluster wont move until BCM miles reach cluster miles. I am familiar with programming cluster via eeprom, but the BCM? This I have no clue. I tried to read two IC 8 pin and one did have the VIN stored, but looked nothing like the cluster data. the other IC had nothing on it. Anyone know how to program the miles to the BCM?? Thanks guys.

Hi, I have Insignia A model year 2016 with dead HMI 2.5 unit (84089009 SW: 15.2B033, HW: PP 2.00). I installed a spare HMI 2.5 from Insignia B year 2018 (84251842 SW: 17.1B010, HW: PP 2.00). I have now unlocked the theft lock by using the VIN relearn file (bought from here), and the HMI started working. Now I'm having couple of issues that I'm trying to solve. 1) The new HMI unit has Rear View Camera activated. I don't have time to install a camera to my car, so I would like to disable it 2) The microphone doesn't not work I tried to update the HMI unit via SPS by using the car's VIN, to get the calibrations that are correct for my car's setup, but as the ne…

Hello all, I'm working with my project what will have all possible Insignia A options maybe some from Insignia B( But no 4x4 as I'll try to fit Tesla motor for rear drive.) It just so happens I have few broken Intellilux headlights on shelf and decided to give it a try to fit them in Insignia A Headlight housing and with a lot of modification to the housing it did. Just wondering if you can shed some light what additional modules insignia B have for them light to work. P.S Got main headlight modules, leveling sensors front and rear and front camera. And full wiring diagram for Intellilux Headlights would be appreciated. Thanks

Hello I'm a new member and looking to learn everything about the programming of the 2018 Buick Regal (Opel/Vauxhall Insignia B) infotainment center in particular and the dash cluster in general. Looking to change the logos, etc. I know next to nothing about doing this type of programming so looking to learn everything. I'm a systems administrator and phone hacker so I'm confident I can learn it Thank you

Hello I have a 2014 Impala I just updated the HMI from 1.1 to 2.5 (84364934) that doesn't have GPS or OnStar is there a calibration file for it? I have already installed a calibration but the mic doesn't work, someone said it was because of the OnStar

I'm facing very strange for me issue...when I use TIS2web, I no have problem to use mdi or vxnano, but Techline cannot detect them most of time. Any recomendations?

Hello. Would anyone know if it's possible to change VIN and/or transfer data from this 2008 Buick Allure BCM to a working donor BCM? Thanks in advance!

Vin # 2G61V5S31D9120155 The vehicle IPC is stuck in a boot loop. I have full communication with it and can program with sps but it will not accept update via usb. It shows PRND in bottom corner of the enhanced display ipc but does not indicate the gear its in. It will also randomly show the gauge animation then will reboot. No illumination on steering wheel and no heads up display. Any help would be appreciated!

Hello, My 2014 Impala's HMI 1.1 stopped working for a year now (no screen, USB, CD, AUX, Rear Camera) "Only the radio is working", so I thought I could replace it with any other HMI that fits (lol) So I bought an HMI 2.5 from a 2018 Camaro When I installed it first the boot screen appeared ( Cadillac logo for some reason) and then it showed "Locked" and the USB works (as a charger at least) My radio is still working and I can control it from the steering wheel with no problems but then I tried to "Replace and program" using SPS2 and it showed a success message but the screen turned black (no boot screen, no Locked) Using GDS2 I can see that the VIN on …

Can anyone obtain BCM calibrations for W0LGT8EM4E1123090 please?

Dps orqalu qanday qilib win kirgizsak buladi. JAVOB UCHUN OLDINDAN RAHMAT

KIMDA QANQA MA'LUMOT BOR .MENDA SHU PROGRAMMA BOR.USTANOVKA FAYLU

Hello, when programming the radio with DPS, an error message appeared on 99% after the restart. Now the screen is black all the time, not even the itellelink logo. DID is visible, Sps and Dps do not program. What happened? faulty radio.Txt

GM vehicle Radio unlock. Remove the Theft-Lock using the GM DPS tool. Harman NFO3, INFO3.4, INFO3.5, INFO3.6, INFO3.7, INFO3.8 CSM MY19, MY21 SiriusXM GM Radio HMI Unlock Vin Change With DPS, remove the theft lock. HMI 2.5, HMI 2.0 and radio unlock. Remove the Theft-Lock with the GM DPS tool. For European cars/cars that use the SilverBox Radio module. HMI 2.5, HMI 2.0 and radio unlock. Remove the Theft-Lock with the GM DPS tool. For USA cars/cars that use the satellite radio module. ID7SF Silverbox RADIO ASM-RECEIVER LG Electronics. Chevy Chevrolet Spark 2019, 2020, 2021, VIN Change With DPS LC7S VIN Change, Silverbox RADIO ASM-RECEIVER LG Electronics Insi…

Good morning guys. I am trying to reprogram VIN and XML files for a replacement upgraded cluster. When trying to download the calibration files, SPS downloads 17 files but the cluster is supposed to have like 9. Also, DPS is telling me the cluster has 11 calibrations. Which is confusing. Can someone explain this to me please?

Hello Boys and Girls! My car is Opel Insignia 2.0 CDTI Biturbo, MY 2014. The sound system of my car is BOSE. In order to use CarPlay and AndroidAuto, I replaced my HMI 2.0 with HMI 2.5, doing the necessary programming and updates on HMI 2.5. I then updated my silverbox for compatibility with the new hmi 2.5 (after replacing the HMI no sound could be heard when calling). Now everything works perfectly, but a problem occured: the AUX socket (probably) does not work - when I press the media button below the display, with an external MP3 player on (which I used without problems before the silverbox update), it says "No media available", ie. can't find the player (AUX so…

03-06 GMT800 VATS Removal? I know HP Tuners can do it. But is there another option? Thanks in advance.

Figured it would be bcm or ebcm and use xml file through dps but was wondering if anyone else knows more

For GDS2(TLC) deliverable_GM Global v2023.09.14 deliverable_GM Global v2023.09.14.zip

Can someone give me file XMLFile of ECM (Configuration & Setup) 25184940.xml VIN: KLAYA75YDCK566492 ? Thanks you so much

Hey fellow members! Got a 2012 Escalade ESV we have moved frames and installed a diesel in- have all codes fixed for systems except for 2 messages in IPC. Anyone here I can pay to fix this or pay to help me fix this? I have DPS- and it’s awesome for the GlobalA but seems to help very little on older GM LAN stuff. I have no knowledge of how to pull like an XML file & mod it like you’d do on Global A. 2 messages: “Stabilitrak OFF” ”Service Suspension System”

Hello. Updated HMI from 2.0 to 2.5. sn 84089007) Now the question is where to find calibrations? VIN 2G4GN5EX0F9298045