GM Discussion Forum

Hello everybody. Is there a possibility for my 2009 Insignia A car to activate radio remote control and tpms in the BCM? W0LGN67K991049586

Does anyone have access to an Astra-J and Astra-K? I need these calibration files for both vehicles' EBCM, EPS, BCM and IPC. I can't get these files using my insignia setup due to "Hardware Mismatch error." Astra-K 2019: W0VBE6ECXKG380514 Astra-J 2014: W0LPF2EN8EG092081 Thanks.

Is someone willing to help to finish my bench 🙂 and safe me time

hi I have one question The program works with K20 Engine Control Module calibration files Because I tried other files and work good only in K20 Engine Control Module calibration files not work 12692456 Decryption succeeded 12692925 Decryption succeeded 12704333 Decryption succeeded 12712514 Decryption succeeded 12712539 Decryption succeeded 12712577 Decryption succeeded 12716900 Decryption succeeded Please enter packaging namegmc_2020 << automatic input 1 >> << tisweb input 2 >> << SPSToolBridge input 3 >> 1 id:0 value: 12692456 size: 2551 id:0 value: 12692925 size: 170…

Hello. Who can help to flash cruise control in an opel astra j car via mdi?

Hi !Which software I need to buy for this Hmi Vauxhall Insignia 2016 to change VIN ?

Hello all, Can I install an Insignia B BCM in a 2012 Insignia A?

Please help me! How to fix lease not found?

Hello, does anyone have the A11 (radio) calibrations for specified VIN? KLAGA692DEB057548 KLAGA692DFB047423 Thanks!

I have stripped a spare A11 radio to see if i could upgrade the power to give it some more depth. I have removed the amplifier chip in the hope that I can replace it with one more powerful. This is a picture of the amplifier, ST 09400036 I have searched everywhere for a datasheet but can't find one. All I know so far is it's in a Zip25 package and it's 20w per channel. tda7564b.pdf The attached datasheet is for a TDA7564B 4 x 50w which is the same package and I believe it will also be electrically compatible but I just need to find a datasheet to confirm. Anyone have this information?

Hi im having issues with a Vauxhall insignia 2.0 cdti 2012. it had electrical issues when I purchased the car I have changed a full ecu kit but what I didn’t realise is my car still has the original. Electronic parking module , airbag and radio. I’m getting warnings saying ‘’ Theft Deterrent System ‘’ I have the original VIN and PIN codes for the modules. I have a VCX Nano USB Cable I understand I need to use DPS just need some help to get started and to check if I’m on the right path to fixing this car Thanks

Здраствуйте. Может ли кто нибудь поделится калибровкой для мультируль astra j. У меня в комплектации его не было. Купил установил теперь нужна калибровка что бы он заработал

Hello everybody ! Lately. I tried to program an electric power steering on a 2012 orlando 2.4L and unfortunately. I can't upload the calibration files to GM because the new eps is from the aftermarket. Then I have a code telling me that the VIN IS NOT THE RIGHT VIN .mitsmach VIN This is normal. However . This prevents me from being able to access the files necessary to download on GM. Also, I don't have access to any other Chevrolet Orlando from where I am. . So I ask. Is there anyone who can help me get these calibration files. ? Chevrolet orlando 2012. Software=13350556 Calibration = 13363664 Seriously. It will be really appreciated.…

Does anyone know how to change miles on 03-06 suburban? Using DPS or SPS.. I know there's other tools to do it, but I'm looking to see if DPS or SPS specifically can do it ????

Hi all. Old NAVI650 not working anymore, need to replace it. I believe only VIN change is enough ? How i can do that ? As i know there are no eeprom inside where i can change VIN or just swap eeproms, need to do it with DPS.

Hello gents looking to see if anyone has ever changed their factory OS to one that doesn't match the vin. Long story short looking to change my OS from a 2017 escalade to the OS of a 2019 escalade

Hello, I have a Buick Encore US HMI that I want to transfer to EU maps. But it still fails. Work performed: 1. Replace BCM, HMI, RADIO, VIN as per maps. I get the response: Invalid update file The map update file is invalid. 2. I changed the HMI country calibration to EU. After installing the maps at 99%, I get the response: Invalid update file The map update file is invalid. 3. I replaced HMI eeprom with ES HMI eeprom. I get the response: Invalid update file The map update file is invalid. 4. I changed IPS and HMI calibration to ES. I get the response: Invalid update file The map update file is invalid. Maybe someone has an idea? What car configuration i…

I am trying to program RPO into my IPC. I have looked at the tutorial but I keep getting this error. Can anyone help me?

Hello guys, Can anyone share following calibrations for DPS please? Calibration Part Number 1 84028482 Calibration Part Number 2 84234142 Calibration Part Number 3 39040235 Calibration Part Number 4 84014107 Calibration Part Number 5 84071693 Calibration Part Number 6 39005654 Calibration Part Number 7 39040835 Calibration Part Number 8 84235590 Calibration Part Number 9 23458601 Calibration Part Number 10 23211694 Calibration Part Number 11 23459929 Calibration Part Number 12 23348556 Calibration Part Number 13 23199293 Calibration Part Number 14 23199237 Calibration Part Number 15 23199236 Calibration Part Nu…

Hey can someone give me the CAL file 13469917.xml? It is for an Opel Insignia control units P16 instrument cluster VIN W0LGT8ED3C1099877

Has anyone got the wiring diagram for the infotainment system for a 2014 facelift Vauxhall insignia? I'm trying to create a bench test wiring loom to test the possibility of installing a HMI into an Astra J, but also looking to wire up an OEM reverse camera on my 2014 Vauxhall Insignia.

Hi, i foud this thread: Internet without OnStar with any 4G LTE SIM card | Chevy Bolt EV Forum WWW.CHEVYBOLT.ORG I wrote a small instruction on how to get the 4G LTE Internet in a Bolt. maybe someone want or can try to do this mod. This no enable the onstar service again, only enables the wifi hotspot with any sim. Internet without OnStar with any 4G LTE SIM card.pdf

I have changed my corvette 2017 screen with 2014 screen, the screen does not go on, after that i tried use Camaro modules to change radio control module and Human machine module with new screen then goes on, then i put back my genuine radio control module and my human machine control module then the screen goes off Any way i have programmer the radio control module and Human machine control module on techline but after i check the data inside the human machine module i find the vin number did not changed to my car vin number

I come to you this evening with some cool information. For those who have attempted to reprogram the HUD (Heads-Up Display) module in 2014-2017 Holden VF Commodore and all its export models, with the latest available software from SPS, may have been left dismayed when they no longer have an image come up on the windshield. After many hours, some assistance from my Aussie friends, lots of Redbull, and 3 HUDs. I have finally found a backwards way to recover the once working HUD. I was using the VXNANO, a cheap J2534 interface made as a frustrating alternative to the high end or factory offered interfaces. From the information I was told here is what is happening. The …