How to create GM DPS archive file from SPS cache files for HMI module

The BCM only responds to engine specs RPO code.

For all the other features and activation for the BCM, you will need to edit the BCM calibration file itself or swap calibration files from another car that already has those features activated. I can't help here as my experiments with BCM and ECU is very limited.

YO PUEDO AYUDAR EN ESE TEMA 

Excellent work Troy a big thanks for your help.

COOL !! THANKS FOR THIS TUTORIAL !! WORKS PERFECT !!

I NOW CAN FLASH WITH DPS CREATING CALIBRATIONS !!

But i need to know how to use DPS to change the vin ???

I have a USED ECU from a Chevrolet 2.4L 2013 , and i create the calibration as you describe, but the VIN still are the Old calibration VIN, 

Please help me !!

THANKS

Fantastic work Troy Big thank ! Question: Is it possible to put your little manual in pdf file ,it will be great to have a copy of it. Thank you

 What you write :  I created a bench setup recently.  It took me some weeks to sort it. It was pain to get the HMI to speak on the HS-can line. 

In the end I learnt some stuff about it.

For the HMI, all the units must be on the MOST line ie, IPC, CD drive, HMI, Radio, and BCM and/or the MOST loop must be complete.

And most important the BCM is the one who gives the orders if the HMI should speak or not via the 'Serial Data Communication Enable' wire.

I'm using an old xbox360 power supply to power the modules.

I have some question you write that we can use a Most loop instead of BCM ,is any can do or i must use a  GM Chevrolet if i work on a corvette and where connected ? And what voltage and amp power supply i should use ? And i saw that you use steering control you connect them where?

thank you very much

Baldpunk ; you write :the only 2 basic modules for the system are the HMI and the tuner (radio module) and the display of course. If so how do you change the vin in these item if is not your original parts? thank you

Big thanks  Arbe_GTC

The new gm techline connect will download the sps files in a continental folder. 
once sps says it has downloaded the files at 100% the files are on your pc. 

12 minutes ago, OpelGuy said:

but i use old sps, i don't use sps2...

The old sps will download the files to your sps cache folder 100%
 

Are you looking in the correct sps cache folder?

By the way, can you tell me which website you’re using for sps that still uses the older sps? 

55 minutes ago, OpelGuy said:

I found in folder tis2web/tlc/wcache if that's it.

 

Service Box

PUBLIC.SERVICEBOX.PEUGEOT.COM

 

the site doesn't work all day today, maybe they maintain the site or something.

if you need login pm me.

Check this tutorial it shows how to get the SPS calibration files, the location for the files and how to create the DPS archive file.

21 hours ago, Rustamjon Abdullayev said:

Dear Mr. Troy and community.

Hope you are doing well.

During create GM DPS Archive File From SPS Cache for IPC (SPARK M300) model, 

SPS downloaded two .dll format file and one  .cfx file,

So how to creat Archive File from this files?

Pease help

10000001.cfx 124 B · 0 downloads 10001170.dll 149.2 kB · 0 downloads 10011000.dll 228.79 kB · 0 downloads

Those files are not calibration files. 
 

On 4/22/2022 at 7:39 AM, Troy said:

The new gm techline connect will download the sps files in a continental folder. 
once sps says it has downloaded the files at 100% the files are on your pc. 

Has anybody figured out where Techline stores the files now? Still trying to figure this stuff out, I gave up trying when your videos was taken down because there just wasn't any info out there that I could find.. I sometimes have access to a lot of US cars to pull files from and possibly experiment with..

4 hours ago, StringBean said:

Has anybody figured out where Techline stores the files now? Still trying to figure this stuff out, I gave up trying when your videos was taken down because there just wasn't any info out there that I could find.. I sometimes have access to a lot of US cars to pull files from and possibly experiment with..

Techline connect download the files in the sps cache folder. 

On 4/22/2022 at 2:39 PM, Troy said:

The new gm techline connect will download the sps files in a continental folder. 
once sps says it has downloaded the files at 100% the files are on your pc. 

What is the continental folder?

On 9/2/2021 at 3:29 PM, WWEILER said:

Thanks Troy I had a 2018 silverado I was trying to get a arps file to work. It just didnt work. Then I unzipped with 7zip and built a arps file with the bin files and that worked. But it did not let me change the VIN. I need to play around with that yet.  I did try the SET_MEC_TO ZERO and that let me write a new vin over it with SPS so I may just have to use that option

Hi , SET_MEC_TO ZERO where is found