Skip to content
Install the CameraLoops App

Browse CameraLoops via the app. Learn more.

www.CameraLoops.ru

Use the CameraLoops full-screen app on your home screen with push notifications, badges and more.

To install the CameraLoops app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install the CameraLoops app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

DPS VIN & PIN Change Service For General Motors Vehicle Modules

This service is for folks who need to change the VIN and the PIN in a used secondhand General Motors electronic vehicle module, which is not already listed in the downloads section.

I strive to send you a private message with the DPS VIN or PIN change file between 30 minutes to a few hours, depending on your purchasing time and where I am located at the given time.

 

DPS VIN Change Service

You will receive a DPS archive file which can be used to change the VIN in any of these modules listed below.

Supported Global-A 2 or 5 byte seed modules.

IPC: Instrument panel cluster

BCM: Body control module

EBCM: Electronic brake control module
SDM: Sensing diagnostic module (Airbag)

EPS: Electronic power steering

ECC: Electronic Climate Control HVAC

  1. In order to create the DPS VIN change file, you will need to provide the vehicle model name, the year the vehicle was made and the module's SPS utility calibration file.

  2. Click here for the tutorial on how to acquire and identify the module's utility file.

  3. The modules must be Global-A, 2 or 5 byte seed key

 

You can purchase the DPS VIN change file service from the link below.

 

 

DPS PIN Change Service

You will receive a DPS archive file which can be used to change the PIN in any of these modules listed below.

Supported Global-A 2 or 5 byte seed modules.

IPC: Instrument panel cluster

BCM: Body control module

EBCM: Electronic brake control module
SDM: Sensing diagnostic module (Airbag)

  1. In order to create the DPS PIN change file, you will need to provide the vehicle model name, the year the vehicle was made and the module's SPS utility calibration file.

  2. Click here for the tutorial on how to acquire and identify the module's utility file.

  3. The modules must be Global-A, 2 or 5 byte seed key

 

You can purchase the DPS PIN change file service from the link below.

 

 



User Feedback

Recommended Comments

justin101714 Top Member

+justin101714

+Purchaser

So we can finally do Denali clusters? Maybe the Escalade ones too? 

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

On 10/3/2022 at 4:14 AM, justin101714 said:

So we can finally do Denali clusters? Maybe the Escalade ones too? 

 

Yes you can change VIN and PIN in all GM clusters. 

Loading60 Apprentice

Troll-Loading60

Troll-Troll

How I active and change codes in cluster by xml file?

 

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

On 10/8/2022 at 12:54 PM, Loading60 said:

How I active and change codes in cluster by xml file?

 

 

 

dannygn Rising Star

dannygn

Member

what about tcm modules?

 

Lenyn Sanchez Rising Star

Lenyn Sanchez

Member

each file work for all vehicles or i have to get one file for each VIN number

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

On 12/4/2022 at 9:13 PM, dannygn said:

what about tcm modules?

 

Some TCM modules I can do.

 

 

On 12/14/2022 at 5:44 PM, Lenyn Sanchez said:

each file work for all vehicles or i have to get one file for each VIN number

Each file works for that specific GM model vehicle.

CATLOS Rising Star

CATLOS

Member

com esse arquivo posso utilizar em outros modelos similares?

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

31 minutes ago, CATLOS said:

com esse arquivo posso utilizar em outros modelos similares?

The files will work on a specific model vehicle. 

jesus teran Explorer

+jesus teran

+Contributor
  • Contributor

I need to change vin and pin to a BCM with 8 connectors it is Global B seed 12byte can you help me2925B596-158A-4494-A88A-38783937B4FC.thumb.jpeg.4c07195b088381b9b414a5c8df964300.jpeg

4B4BDA6D-30CB-48C2-90BF-486CAC9784D2.jpeg

82603476-3CEB-4939-AEF8-8826A9A6F410.jpeg


Car Hacking Services I Provide For General Motors Vehicles.

  • GM Features Activation/Deactivation
  • GM Remote Diagnosing and Troubleshooting
  • All GM Modules Programming
  • Providing Required GM Calibrations
  • GM ECM/TCM Unlocking
  • GM ECM/TCM Tuning
DSLBURB Enthusiast

+DSLBURB

+Contributor
  • Contributor

Is this still able to be used on newer versions of Tech Connect/SPS2? I see a lot of tutorials, and screenshots you post have older SPS, just curious if it can still be used 

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

2 hours ago, DSLBURB said:

Is this still able to be used on newer versions of Tech Connect/SPS2? I see a lot of tutorials, and screenshots you post have older SPS, just curious if it can still be used 

Yes, it is the same process.

Emmerson Ganyau Rising Star

Emmerson Ganyau

Member

Hi Troy

Can you get me a dps achive file to change vin in tcm for a 2015 chevrolet captiva 2.2 diesel

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

18 minutes ago, Emmerson Ganyau said:

Hi Troy

Can you get me a dps achive file to change vin in tcm for a 2015 chevrolet captiva 2.2 diesel

 

Hi, It's not possible to change the VIN in the TCM using DPS. That's something I'm still trying to figure out.

Emmerson Ganyau Rising Star

Emmerson Ganyau

Member

Thanks for the info.

So which dps achive file should I get for changing vin in Ebcm for the same car, Chevrolet captiva 2.2d 2015?

Troy Grand Master

Troy

Administrator

GM Car Hacking Expert

3 minutes ago, Emmerson Ganyau said:

Thanks for the info.

So which dps achive file should I get for changing vin in Ebcm for the same car, Chevrolet captiva 2.2d 2015?

 

I would need to create the file. Tell me the VIN

Emmerson Ganyau Rising Star

Emmerson Ganyau

Member

Hi Troy.

I was thinking which vin number to give...

I have a car with all its original modules and not starting. Decided to buy all modules from an accident damaged car which was starting but couldn't manage to get the ebcm and tcm. So since you said the tcm vin can't be changed I'm thinking is it possible to change the ecm, cluster and bcm from the donor car to my vin?

I have the rcdlr and transponder as well, from the donor car. Is that going to work.

The car is a 2015 Chevrelot Captiva 2.2d

If it works then I will send my original vin

Wabbas Rising Star

+Wabbas

+Purchaser

Do we have to change the vin first then the pin or vice versa?

AddictedPS Rising Star

AddictedPS

Member

Hi Troy. I am building a custom truck with 2013 SS camaro interior, I have been able to program my BCM and ECM with SPS2. I need to change the VIN and PIN in my Gauge cluster. I would also like to turn off some of the errors. (Service electronic power steering, Service blind spot, Service air bag , Etc... Can you write a file for me to use in DPS to do this? (For payment of coarse) Thank you in advance. (I just want to get the immobilizer to learn my keys and get rid of the error codes on the gauge cluster. ) 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

All Articles

Popular Members

  1. hassan77h
    +hassan77h
    27
  2. Troy
    Troy
    22
  3. uglyoldbastard
    +uglyoldbastard
    13
  4. regloops
    +regloops
    8
  5. GM-Enthusiast
    +GM-Enthusiast
    7

New Members

  1. David Fontenot
    David Fontenot
      Member
    Joined
  2. SSAUTOZ
    SSAUTOZ
      Member
    Joined
  3. valdemarford
    valdemarford
      Member
    Joined
  4. Course faycal khalil
    Troll-Course faycal khalil
      Troll-Troll
    Joined
  5. Troll stevie nick
    Troll-Troll stevie nick
      Troll-Troll
    Joined
  6. Troll Parkerchevy
    Troll-Troll Parkerchevy
      Troll-Troll
    Joined
  7. Hayk Vardanyan
    Hayk Vardanyan
      Member
    Joined
  8. tunedbycasco
    tunedbycasco
      Member
    Joined
  9. freehugs
    freehugs
      Member
    Joined
  10. ceberon
    ceberon
      Member
    Joined

CameraLoops™
Powered by Art
All Trademarks appearing on this website are the property of their respective owners.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.