General Forum

MY TRUCK WAS STOLEN AND NEED MY VIN CHNAGED

Hi everyone! Can anyone tell me how to add the required language to the IPC so that the selection appears as in the picture? I learned how to set the default language, regardless of the HMI, but now I'd like to add Russian as a language option.

New to this so go easy please ,I am looking for the easiest way out to change VIN and PIN on a used ECM .I have the pin for both ecms and VINs .Do i need archive files and where will I get them.Thank you all.

Hello guys I have corvette c7 when i drive it which everything is ok and but sometimes when i put it to D does not appear and it does not want transfer to D but when i stop engine and turn off the car, after left here 5 minutes which everything is ok and D appears and transfer, then drive it may 30 minutes the D again disappeared and it does not transfer to D By the way manual gear which transfer and all R N P is transfers good as well

hello, how can Cancel or delete steering column module for gmc yukon 2015

is possible program virgem bcm with dps?? thanks jorge costa

Can someone please share this file. Somehow I don't have it in that folder, although all the spsCache files got downloaded. Thanks!

Hi, I'm new and I'm asking for your understanding. I have a 2011 Astra J and I changed the odometer from 2016 cars. There is a message and indicator in the counter regarding TMPS. How to turn it off? There is no TMPS in my car. Additionally, in the new counter, the light does not come on when I pull the handbrake. The car from 2016 had a handbrake with a lever, and my car has an electronic brake. Can this also be changed somehow? Please help.

VCX Nano OEM on the VCX Site or GDS2 Which one is Preferred?

hi everyone 2018 astrak I have a problem with the steering column module lock. I don't want to change it. I want to delete it or cancel it from the car by modifying the BCM file. I want the car to work without the steering column module. thank you in advance

Hello. Searching solution how to activate remote start for insignia or astra k cars. Anybody maybe already have dps files and can share ? I know that need to flash calibrations to bmc and ecu, but still do not know which calibrations and what numbers should be. Any experience ?

hi all new here is there anyway to copy using the SPS saver program and edit the sps files after performing an update and then flash after modifying (.bin) with say winols a custom ecm file on the GM e42 global B ecm?

Hello, this is the multimedia module in my 2017 model insignia b vehicle. I want to connect an Amplifier to this, is there a cable kit for this?

Hi iam just wanting to know if the astra k ipc are 2byte seed . And same with the insigina ipc mk1 facelift ones .going to do the ipc conversion ona astra j and all ready got the astra j 2byte seed files And before I buy the lead for the conversion . If the files are not compatible please can u tell me which ones i need thanks

Hello all I need help changing vin on sdm module on a 2023 gmc 2500 I have tried several times with sps but it fails I had to change the vin on ecm bcm etc tdue to a programmer getting pluged in that changed the vin and now i need waranty work and have to have the vins back origional and this is the only one left to change thanks in advance I have dps and team viewer and sps and gds on my computer

I have been trying for months to get things fixed on my 2023 sierra and this site is the only one I have found thats willing to help and I appreciate it so much a lot of great info on here.

Hello dear community, I have an ECC in my astra j 2011 which cannot be programmed via sps. Under dps read out I see that no part number and no vin is programmed. Have you ever seen something like this? I have a complete eeprom dump.

Hello everyone , As the title shows , I'm working on 2019 Floaded C7 ZR1 , got new bcm , keyless entry and anti theft deterent , programmed via sps and did immo learning the car starts then dies m anti theft is activated , all controls have the same vin except the cluster , while flashing bcm i choosed reprogrammong instead of replace , and stopped at bpp relearn where to go from here , I have DPS m access to sps

Hello guys, i have my corvette c7 screen gone to black, i checked all wiring From screen to HMI is ok From screen to radio control module is ok From screen to HAVC is ok From screen to auxilary HAVC is ok All computer data is ok Positive and negative is ok Also i have replaced new screen still same issue there is no any light which completely black, any one known this before Thanks

hi everyone 2018 Opel Insignia-B On the screen Engine Cover Reset See Owner's Manual Does anyone have any ideas on ? Best Regards

Has anyone encountered this problem? Opel Insignia-A ECM module

Hi How are you all. How can I activate or open the Global B feature in DPS? I have a VXDIAG VCX Nano Pro and VXDIAG FD cable. Thanks

Hello, have someone a wiring plan from a 2019-2020 Chevy, GMC or Cadillac with a Video Control Module 84755320. The modul is for the 360 degress modul. Thanks a lot

Hi Guys how to program second hand module to insygnia 2013 Thanks Greg

GM Holden 2011-2012 VE Commodore IQ Unit files needed Hi would anyone happen to have the 92265505 calibration file along with the corresponding .bin file that goes with it but I can't find the number as I can't get the files from SPS for some strange reason. I have the blue screen unit firmware which is 92265502 + 92265510 files and I have the setup and config files all set for DPS I just can't get my hands on the above files. Please let me know if you can help. Cheers