Hi all. I have an Opel Mokka and I want to activate the standard autostart. BVT

 

I have BCM calibrations from a Chevrolet TRAX and a Buick Encore.

But I don’t know what calibration numbers need to be changed in my factory archive?

I tried changing 5, 9, 10, but the autorun item does not appear in the radio menu.

 

Tell me how to do this?

Hello, just to clarify is it the remove start BTV you’re attempting to program? 

3 minutes ago, Opelinsignia1985 said:

Hello, just to clarify is it the remove start BTV you’re attempting to program? 

Yes

13 minutes ago, T_Ivan said:

Yes

I’d look at Cal 2

 

cal 5 should also give you the remote start settings in radio 

1 hour ago, Opelinsignia1985 said:

cal 5 should also give you the remote start settings in radio 

I collected a DPS archive where all calibrations are native except 2 and utility. Such an archive is not flashed into my BCM.
Or rather, it is flashed successfully, but the calibration numbers themselves do not change in the BCM.

10 hours ago, Opelinsignia1985 said:

I’d look at Cal 2

 

cal 5 should also give you the remote start settings in radio 

I collected the archive as in the picture above GIBRIG.
All calibrations are original except 2 and 5. There was an error with the firmware.

5 minutes ago, T_Ivan said:

I collected the archive as in the picture above GIBRIG.
All calibrations are original except 2 and 5. There was an error with the firmware.

you need enable the theft deterrent sec code option and write your sec code

On 11/5/2024 at 11:05 PM, Arbe_gtc said:

you need enable the theft deterrent sec code option and write your sec code

I made an archive of native calibrations and Buick Encore.

I managed to flash my BCM at home, now I need to try to do it in the car.

Replaced: cal 2, 3, 5.

On 11/7/2024 at 5:19 AM, T_Ivan said:

I made an archive of native calibrations and Buick Encore.

I managed to flash my BCM at home, now I need to try to do it in the car.

Replaced: cal 2, 3, 5.

Did it worked out all good in the end?

8 hours ago, Opelinsignia1985 said:

Did it worked out all good in the end?

It was possible to flash it (BCM), but the menu did not appear in the radio A11.

I probably need to make changes to the native calibration №5, but I don’t know where yet.

11 hours ago, T_Ivan said:

It was possible to flash it (BCM), but the menu did not appear in the radio A11.

I probably need to make changes to the native calibration №5, but I don’t know where yet.

 Sounds like BTV works then?

 

Be fun to enable one by one in No 5 cal to find out which one does remote start in radio 

Does BTV work for you at all?? Now I'm struggling with Mokka X 2017, after changing the cal in the BCM, the fuel pump does not move and the key behaves strangely. When I press the start button, the car only blinks twice.

Just now, zamich85 said:

Does BTV work for you at all?? Now I'm struggling with Mokka X 2017, after changing the cal in the BCM, the fuel pump does not move and the key behaves strangely. When I press the start button, the car only blinks twice.

 

3 minutes ago, zamich85 said:

тебя вообще BTV работает

No work

9 hours ago, zamich85 said:

Does BTV work for you at all?? Now I'm struggling with Mokka X 2017, after changing the cal in the BCM, the fuel pump does not move and the key behaves strangely. When I press the start button, the car only blinks twice.

 

Everything in the ECM was activated for me when I did the Euro 2 firmware.

I only need to make changes to my BCM.

I can also change the key myself.

If you post files, I won't be able to download them.

ECM_K20_OPEL_MOKKA_2013_STOK.zip BCM_K9_OPEL_MOKKA_2013_STOK.zip

Calibrations BCM #5 that didn't give results

 

95286098

95130536

95130509

95286085

95286114

42596991

94517946

94785860

42733094

 

I found over 50 VIN numbers for Buick Enroce that came with BTV from the factory.
I checked all these numbers manually and wrote down the calibration numbers.

I made myself 12 different DPS archives, all of them successfully loaded into my car, but I still did not have a remote start menu in my radio.

 

The radio just now has a menu for turning on heated seats with remote start, but there is no remote start itself.

 

What am I doing wrong?

In gds2 you can try to set the car to Buick Enroce and go to K9 and there should a info about remote start and remote start cancel.

9 hours ago, T_Ivan said:

Calibrations BCM #5 that didn't give results

 

95286098

95130536

95130509

95286085

95286114

42596991

94517946

94785860

42733094

 

I found over 50 VIN numbers for Buick Enroce that came with BTV from the factory.
I checked all these numbers manually and wrote down the calibration numbers.

I made myself 12 different DPS archives, all of them successfully loaded into my car, but I still did not have a remote start menu in my radio.

 

The radio just now has a menu for turning on heated seats with remote start, but there is no remote start itself.

 

What am I doing wrong?

Just to clarify so I can understand what you were trying to do.

 

You were able to program remote start BTV and it’s works well off the key. However you want an option in the vehicle menu where you can turn remote start on or off at anytime?

 

or BTV remote start doesn’t work at all?

 

11 hours ago, Opelinsignia1985 said:

or BTV remote start doesn’t work at all

BTV doesn't work, most likely I need to change my key to 5 buttons.

On 05.11.2024 at 08:13, T_Ivan said:

 

 

My Buick Encore with BVT does not have this point!

8 hours ago, Mindaugas Cernius said:

My Buick Encore with BVT does not have this point!

 

You should call it:

Remote Start Auto Heat Seats

On 11/13/2024 at 11:41 PM, zamich85 said:

Does BTV work for you at all?? Now I'm struggling with Mokka X 2017, after changing the cal in the BCM, the fuel pump does not move and the key behaves strangely. When I press the start button, the car only blinks twice.

what key do you have that you use to start the car?

On 11/13/2024 at 11:43 PM, zamich85 said:

the car only blinks twice

Did you only flash the BCM?
Have you updated the ECM?