On 4/21/2023 at 5:20 PM, WSOpel said:

I have test my Software and now i can do all Cars for 2010-2022 with remote Start ;D

hi @WSOpel what's the result?

On 08.08.2022 at 18:18, Sergey said:

Добрый день.
Никто не разобрался какие калибровки отвечают за автозапуск? Поменял 2. Система 9. Управление гидропередачей 20. Регулировка вентиляции и кондиционирования у меня машина перестала заводиться, хотя ошибок не было. Менял отдельно 9. Управление силовой передачей, но запуск не появился. Заменить все калибровки не получится, как я писал выше, автомобили-доноры не имеют точной конфигурации систем.

Good afternoon. Did you manage to remote start opel astra j?

18 hours ago, T_Ivan said:

Good afternoon. Did you manage to remote start opel astra j?

YES

22 hours ago, WSOpel said:

YES

Which blocks need to be updated? BCM?
Can you tell me what calibration needs to be added?

On 4/21/2023 at 4:20 PM, WSOpel said:

I have test my Software and now i can do all Cars for 2010-2022 with remote Start ;D

@WSOpel Can you activate it in Opel Insignia 2015 A20DTH (EDC17)?

@WSOpel

What needs to be edited and in which blocks?
W0LGT8GM5C1045901 the latest available calibrations have been installed.

Hello, which tool need i to open the File from the ECU?

On 8/26/2024 at 4:02 PM, tobiasp said:

Hello, which tool need i to open the File from the ECU?

HPTuner, Trasdata, Foxflash, EFILive, TunerCat, etc

Hello, thanks a lot i will check it. Can i also other GM Calibrations open with this tools?

Hey guys, what calibration flie (#1-20 bin) in the BCM is responsible for the remote start?

Hi, What key with remote start works on a astra k or insignia b?

On 10/5/2024 at 5:04 PM, uinbytes said:

Hey guys, what calibration flie (#1-20 bin) in the BCM is responsible for the remote start?

It should be in Cal #5 I think.

9 minutes ago, BLKATSG said:

It should be in Cal #5 I think.

Found in calibration #2

Post 

 

8 minutes ago, uinbytes said:

Found in calibration #2

Post 

 

Ah so just the timer is in #5 then.  Or I'm thinking of the incorrect year BCM's

Can you say what bytes must be changed?

On 10/31/2024 at 10:04 PM, tobiasp said:

Can you say what bytes must be changed?

did you manage to find out?

I test with original holden rhen remote start works. But i don't know waht i must changed in the engine ecu. Did you know it and dcan say it?

3 minutes ago, tobiasp said:

I test with original holden rhen remote start works. But i don't know waht i must changed in the engine ecu. Did you know it and dcan say it?

you need to collect your DPS archive for the ECU and BCM and flash the car.

In the BCM it is necessary to change calibration 5, in the ECU I don’t know.

Ah ok, that is right in BCM the File 5 only the ECM i don´t know what right is. With all files from the Holden Astra it works.

10 minutes ago, tobiasp said:

Ah ok, that is right in BCM the File 5 only the ECM i don´t know what right is. With all files from the Holden Astra it works.

What's stopping you from leaving it as is?

Haha no the adaptive cruise control not work it is not inside the holden file

On 4/3/2023 at 10:55 PM, WSOpel said:

Hello Guys for Insignia i can activate Remote Start Finally. On Petrol you have to Change 1 DID

Hello.
When you say 1 DID, do you mean 1 calibration DPS or 1 DID in XML, for example DID0027?

 

1 DID for example DID0027?

 

Hi all.
Help me out guys.
I found over 50 VIN numbers for Buick Enroce that came with BTV from the factory.
I checked all these numbers manually and wrote down the calibration numbers.

I made myself 12 different DPS archives, all of them successfully loaded into my car, but I still did not have a remote start menu in my radio.

 

The radio just now has a menu for turning on heated seats with remote start, but there is no remote start itself.

 

What am I doing wrong?

Hi you need engine file and bcm file. Bcm number 5 and engine Nr. 1 or two. Search a car with same rpo and use this engine file