Hello, I was wondering if anyone had any help or guidance on how to remove the tpms system from a 17 chevy cruze. Im very new to all this and I'm trying to learn in my spare time. I also need to remove the active grill shutter from my car as well if someone could potentially help me figure that out as well. Thanks in advance.

Active grille shutters were controlled by an ECM, if no mistaken - so you should disconnect the plug and perform K20 ECU Setup & Configuration process in SPS (or with DPS)

I will see if I can get that figured out, thankyou!

I find the word "active" grill shutters helpful in my search of issues with a 22 envision. This would tell me the open/ close is monitored and I should make sure feedback is working properly ..... right now it is open circuit all the time . The hood is open circuit on purpose so it does not set the auto-start at every stop sign.

@Todrello 
Btw, I was always curious - does this sets a visual alert on IPC and telltale sound when starting a drive, if hood ajar switch is disconnected?

Wish I had visuals/ sound. The radio HMI and IPC are blank /completely dark so could not say at this point. Also I should add no chime/sounds at all at anytime . This is the 22-23 envision with no comms between 7 modules. Thanks