Hello guys, i have learned a key and the car does not want to start which gives theft determent system, i have did reset for it which ignition one for 11 min then of for 30 seconds four times but not worked

Any way to identify by the way miles on cluster which not appears which gives - - - - -

Edited April 15, 20251 yr by Morooo
Spelling

Hi, if your mileage is displaying——- there must’ve been a change to the bcm or the IPC.

If all the modules in the security system does not have the same vin and pin you will not be able to program the vehicle key using gm sps.

Did you change IPC or bcm?

More info here.

 

 

I have transferred the processor and eprum from original bcm to my new used bcm

A bcm eprom swap should solve all issue.

Did you change the IPC?

Do you have a photo of the eprom chip you swapped? Making sure you swapped the correct chip.

Do not have pic of it but the genuine one of car when i read it there is no vin number in it 😁

Must be the wrong chip then. As the eprom dump should show the pin and vin.

When i do all key lost then i read security code which is read right then i start programs and configuration then gives me complete

2 hours ago, Morooo said:

I have transferred the processor and eprum from original bcm to my new used bcm

transfer only eeprom,, 95320,, if bcm came from same model,, no other to change., do this if old bcm have no security issue,
if security issue, used bcm need to flash virgin file to reprogram by sps.

Yeah sure i transferred this eprum 95420

38 minutes ago, Morooo said:

Yeah sure i transferred this eprum 95420

renew bcm,, program by sps,, it not sucess bcm is not the problem,,

NEW BCM 95320 13594692.bin

On 4/16/2025 at 1:02 AM, Morooo said:

Hello guys, i have learned a key and the car does not want to start which gives theft determent system, i have did reset for it which ignition one for 11 min then of for 30 seconds four times but not worked

Any way to identify by the way miles on cluster which not appears which gives - - - - -

If car still no start, send emulated eeprom file and MPC5674 flash file in separate reading... i can delete vats