Need help with 

Incorrect Environment Identifier Received From Electronic Brake Control Module

 

Incorrect Environment Identifier Received From Inflatable Restraint Sensing and Diagnostic Module

 Truck wont start

Change SDM PIN CODE 

Did you replace the EBCM and SDM with used part?  if yes, you will need to change the VIN and PIN in all those used modules and then remove and reprogram the vehicle's keys.

More info can be found in the weblink below.

 

 

i did not use any used modules 

2 minutes ago, Adrian Carrillo said:

i did not use any used modules 

Which modules did you replace? 

7 minutes ago, Adrian Carrillo said:

i did not use any used modules 

As Troy is asking, did you replace any though?  You must have to have tripped IMMO?

BCM, On Star, keyless module, hvac remote module, instrument cluster, steering lock module, 

Reprogram the keys using the option in the that article will erase those DTC. 

On 2/28/2024 at 11:40 PM, Adrian Carrillo said:

Need help with 

Incorrect Environment Identifier Received From Electronic Brake Control Module

 

Incorrect Environment Identifier Received From Inflatable Restraint Sensing and Diagnostic Module

 Truck wont start

IF CAR NOT START WITH ONLY THAT CODES,, YOU CAN START IT JUST REMOVE SDM AND BRAKE SYSTEM CONTROL MODULE FUSES,, IF STILL NO START SORT OTHER ISSUE,, DATA COMMUNICATION,,,,